China Kgg Cable Carrier Metal Energy Hose Wires Drag Tracks Cable Chain Xc30 Series bush chain excavator

Solution Description

Cable Carrier

KGG delivers 5 sequence of vitality chains to meet buyer demands. 

What is actually the cable chain?

Cable chain is utilized to carry and safeguard cables, hydraulics, pneu-   matics and other hoses. It regulates the movement of hoses to protect them from intertwining, twisting and injury. Cable chain is merged by flexible rotating links, commonly utilized in the place cell electrical power source required, this sort of as device resources, crane, building machinery, reducing and welding equipment, electronics, warehousing logistics  equipment,  transportation  equipment,  injection  molding business, vehicle production, steel mill…

Positive aspects of cable chain technique:

one. Versatile programs, not only for cables but also for all hoses (cables, optical cables, hydraulics, pneumatics and many others.)
2. Nearly maintenance cost-free, protected and dependable, widly used 
3. Modular design, straightforward to assemble and keep
4. When compared with sliding make contact with line, cable chain program is a lot more secure, risk-free and trustworthy
five. Compared with cable reel, no tension prerequisite on cables, lowering cable expense, defending cables, growing lifetime
6. In comparison with cable pulling, greatest 50 % cable cost saved and less set up room

Specification Record

 

Opening principle Series Internal top[mm] Outer peak[mm] Internal width[mm] Outer width[mm] Bending radius[mm] Pitch Max unsupported fill fat [kg/m] Max unsupported size [m] Max long vacation size [m] Material of Mounting brackets
                  Plastic Metal
MC is Non snap-open. ME is Empower to open up from 1 facet MC·ME10-fifteen 10-15 14-19 ten – fifty seventeen – 58 eighteen – 38 20 .7-1.2 .8-1.4 40 /  
ME20-32 twenty-32 twenty five-39 fifteen – eighty 26 – ninety one 28 – 180 30 one.five 1.four fifty /  
QC Break up crossbar 1 side QC20 20 twenty five twenty five – fifty 36 – 61 28 – 100 30 .5 .sixty five /
QC32 32 39 twenty five – fifty 36 – sixty one fifty – a hundred twenty five 30 .seven one /
HC Snap-open from equally side HC20 20.00 30.00 20 – 125 34 – 139 35 – 180 33 5 2.6 one hundred twenty /  
HC25 twenty five.00 36.00 twenty – one hundred twenty five 37 – 142 50 – 200 40 ten two.8 a hundred and fifty /  
HC35 35.00 56.00 fifty – four hundred 74 – 424 sixty – 250 60 25 3.four 200 /  
HC45 45.00 66.00 fifty – four hundred 76 – 426 75 – 300 70 38 three.9 250 /  
HC55 fifty five.00 77.00 50 – 400 80 – 430 a hundred twenty five – 400 70 forty five 4 250   /
HC60 sixty.00 87.00 100 – five hundred 134 – 534 one hundred thirty five – 400 ninety 65 5 300   /
HC80 80.00 108.00 a hundred – 500 one hundred fifty – 550 150 – five hundred ninety sixty eight 6 three hundred   /
HT Tube, snap-open from the two sides HT20 twenty 30 forty – 100 fifty four – 114 seventy five – one hundred eighty 33 five two.6 one hundred twenty /  
HT25 25 36 40 – 100 57 – 117 seventy five – 200 forty ten two.eight 150 /  
HT35 35 fifty six 50 – four hundred 74 – 424 a hundred twenty five – 250 60 25 3.four two hundred /  
HT45 45 66 50 – four hundred 76 – 426 125 – 300 70 38 three.9 250 /  
HT55 55 77 fifty – four hundred eighty – 430 a hundred and fifty – 400 70 45 4 250   /
HT60 sixty 87 a hundred – five hundred 134 – 534 one hundred fifty – four hundred ninety sixty five 5 three hundred   /
HT80 eighty 108 a hundred – 500 a hundred and fifty – 550 two hundred – 500 90 sixty eight six 300   /
XC Open up, snap-open from the two sides XC30 30 40 20 – 125 36 -141 55 – 200 25 3 1.6 50 /  
EC Open, snap-open up from each sides EC35 35 50 20 – one hundred twenty five 37 – 142 75 – 250 33 8 2.two 50 /  
ET Tube, snap-open from equally sides ET35 35 50 50 – a hundred twenty five 67 – 142 75 – 250 33 8 2.two 50 /  

Manufacturing facility Thorough PROCESSING Photographs

Substantial Quality Manage Method

 FAQ

one. Why choose CZPT China?

More than the past 17 several years, CZPT has always insisted that “items and solutions” begin from Japanese industry requirements,taking ZheJiang expectations as the base line, actively make investments in the improvement of new transmission factors and self-experiment and take a look at. With the provider tenet of “exceeding customer anticipations”, create a “dependable” partnership.

two. What is your primary merchandise ?

We are a foremost maker and distributor of linear movement components in China. Especially miniature size of Ball Screws and Linear Actuators and linear motion guideways. Our brand name “KGG” stands for ” Know-how,” ” Great High quality,” and ” Great benefit” and our factory is located in the most advanced metropolis in China: ZheJiang with the very best gear and advanced technological innovation, totally stringent top quality control program. Our intention is to provide world leader class linear movement parts but with most reasonable value in the entire world.

three. How to Customized-created (OEM/ODM)?

If you have a merchandise drawing or a sample, make sure you send out to us, and we can customized-produced the as your necessary. We will also supply our professional advices of the goods to make the design and style to be more realized & increase the performance.

4. When can I get the quotation?

We typically quote in 24 several hours right after we get your inquiry. If you are quite urgent to get the cost,remember to get in touch with us or tell us in your e mail so that we will regard your inquiry priority.

5. How can I get a sample to check the quality?

Right after affirmation of our quoted price, you can area the sample order. The sample will be commenced following you indication back our detailed complex file.

6. What’s your payment conditions?

Our payment phrases is 30% deposit,stability 70% ahead of shipment.

To Be Negotiated 1 Piece
(Min. Order)

###

Logo Printing: with Logo Printing
Size: Various Models
Customized: Non-Customized
Type: Cable Carrier
Material: Plastic
Certification: ISO 9001:2008, ISO 9001:2000

###

Customization:

###

Opening principle Series Inner height[mm] Outer height[mm] Inner width[mm] Outer width[mm] Bending radius[mm] Pitch Max unsupported fill weight [kg/m] Max unsupported length [m] Max long travel length [m] Material of Mounting brackets
                  Plastic Steel
MC is Non snap-open. ME is Enable to open from one side MC·ME10-15 10-15 14-19 10 – 50 17 – 58 18 – 38 20 0.7-1.2 0.8-1.4 40 /  
ME20-32 20-32 25-39 15 – 80 26 – 91 28 – 180 30 1.5 1.4 50 /  
QC Split crossbar one side QC20 20 25 25 – 50 36 – 61 28 – 100 30 0.5 0.65 /
QC32 32 39 25 – 50 36 – 61 50 – 125 30 0.7 1 /
HC Snap-open from both side HC20 20.00 30.00 20 – 125 34 – 139 35 – 180 33 5 2.6 120 /  
HC25 25.00 36.00 20 – 125 37 – 142 50 – 200 40 10 2.8 150 /  
HC35 35.00 56.00 50 – 400 74 – 424 60 – 250 60 25 3.4 200 /  
HC45 45.00 66.00 50 – 400 76 – 426 75 – 300 70 38 3.9 250 /  
HC55 55.00 77.00 50 – 400 80 – 430 125 – 400 70 45 4 250   /
HC60 60.00 87.00 100 – 500 134 – 534 135 – 400 90 65 5 300   /
HC80 80.00 108.00 100 – 500 150 – 550 150 – 500 90 68 6 300   /
HT Tube, snap-open from both sides HT20 20 30 40 – 100 54 – 114 75 – 180 33 5 2.6 120 /  
HT25 25 36 40 – 100 57 – 117 75 – 200 40 10 2.8 150 /  
HT35 35 56 50 – 400 74 – 424 125 – 250 60 25 3.4 200 /  
HT45 45 66 50 – 400 76 – 426 125 – 300 70 38 3.9 250 /  
HT55 55 77 50 – 400 80 – 430 150 – 400 70 45 4 250   /
HT60 60 87 100 – 500 134 – 534 150 – 400 90 65 5 300   /
HT80 80 108 100 – 500 150 – 550 200 – 500 90 68 6 300   /
XC Open, snap-open from both sides XC30 30 40 20 – 125 36 -141 55 – 200 25 3 1.6 50 /  
EC Open, snap-open from both sides EC35 35 50 20 – 125 37 – 142 75 – 250 33 8 2.2 50 /  
ET Tube, snap-open from both sides ET35 35 50 50 – 125 67 – 142 75 – 250 33 8 2.2 50 /  
To Be Negotiated 1 Piece
(Min. Order)

###

Logo Printing: with Logo Printing
Size: Various Models
Customized: Non-Customized
Type: Cable Carrier
Material: Plastic
Certification: ISO 9001:2008, ISO 9001:2000

###

Customization:

###

Opening principle Series Inner height[mm] Outer height[mm] Inner width[mm] Outer width[mm] Bending radius[mm] Pitch Max unsupported fill weight [kg/m] Max unsupported length [m] Max long travel length [m] Material of Mounting brackets
                  Plastic Steel
MC is Non snap-open. ME is Enable to open from one side MC·ME10-15 10-15 14-19 10 – 50 17 – 58 18 – 38 20 0.7-1.2 0.8-1.4 40 /  
ME20-32 20-32 25-39 15 – 80 26 – 91 28 – 180 30 1.5 1.4 50 /  
QC Split crossbar one side QC20 20 25 25 – 50 36 – 61 28 – 100 30 0.5 0.65 /
QC32 32 39 25 – 50 36 – 61 50 – 125 30 0.7 1 /
HC Snap-open from both side HC20 20.00 30.00 20 – 125 34 – 139 35 – 180 33 5 2.6 120 /  
HC25 25.00 36.00 20 – 125 37 – 142 50 – 200 40 10 2.8 150 /  
HC35 35.00 56.00 50 – 400 74 – 424 60 – 250 60 25 3.4 200 /  
HC45 45.00 66.00 50 – 400 76 – 426 75 – 300 70 38 3.9 250 /  
HC55 55.00 77.00 50 – 400 80 – 430 125 – 400 70 45 4 250   /
HC60 60.00 87.00 100 – 500 134 – 534 135 – 400 90 65 5 300   /
HC80 80.00 108.00 100 – 500 150 – 550 150 – 500 90 68 6 300   /
HT Tube, snap-open from both sides HT20 20 30 40 – 100 54 – 114 75 – 180 33 5 2.6 120 /  
HT25 25 36 40 – 100 57 – 117 75 – 200 40 10 2.8 150 /  
HT35 35 56 50 – 400 74 – 424 125 – 250 60 25 3.4 200 /  
HT45 45 66 50 – 400 76 – 426 125 – 300 70 38 3.9 250 /  
HT55 55 77 50 – 400 80 – 430 150 – 400 70 45 4 250   /
HT60 60 87 100 – 500 134 – 534 150 – 400 90 65 5 300   /
HT80 80 108 100 – 500 150 – 550 200 – 500 90 68 6 300   /
XC Open, snap-open from both sides XC30 30 40 20 – 125 36 -141 55 – 200 25 3 1.6 50 /  
EC Open, snap-open from both sides EC35 35 50 20 – 125 37 – 142 75 – 250 33 8 2.2 50 /  
ET Tube, snap-open from both sides ET35 35 50 50 – 125 67 – 142 75 – 250 33 8 2.2 50 /  

How to choose a drive chain

The process of manufacturing a drive chain starts with bushing. Both inner and outer diameters are strictly measured to ensure tight tolerances. The roundness of the bushing is critical as irregular surfaces in the contact area can cause accelerated wear and shorten chain life. That’s why the CZPT manufacturing process is carefully designed to optimize the wear performance of the chain. There are several types of bushings including roller, forged rivetless, flat top, and timing.
chain

roller chain

The tensile strength of a roller chain is the number of pounds it can withstand before breaking. Fatigue strength is equally important, although the two do not necessarily go hand in hand. Fatigue strength depends on several factors, including the quality of steel used in manufacturing, the quality of the pitch holes, the type of shot peening used, and the thickness and design of the link plates. Here are some things to consider when choosing a roller chain for a drive chain.
When sizing a chain, first determine how much power will be delivered. Then, determine how many teeth you need for the drive sprocket. The gear ratio is approximately 2:1. The number of sprocket teeth depends on the size of the motor. A chain with a higher tooth count requires fewer teeth than a smaller chain. The size of the drive sprocket also depends on the horsepower of the motor.
Before installing rollers or conveyor chains, make sure the drive system is properly aligned. If the drive chain is misaligned, the load on other components will be uneven. This can cause excessive wear on the sprocket or roller chain. Also, check that the sprocket is as close to the bearing as possible. Connecting links can be secured using openings or spring clips.
Different manufacturing processes can affect the performance of the roller chain. Some manufacturers have chains pre-installed at the factory to minimize initial stretch. Others build chains by preloading sprockets and ensuring consistent precision heat treatment. The final product may have greater elongation or less wear than previous products. It is best to follow the manufacturer’s recommendations to extend the life of the roller chain. If you are interested in purchasing a new drive chain, please contact a trusted supplier in your area.

Drop forged rivetless chain

Forged rivetless drive chains are ideal for applications where flexibility and strength are critical. The chain consists of forged steel components for high strength and lightweight. These chain assemblies are easy to assemble without the use of tools and are commonly used on carts, assembly lines, and drag conveyors. They are also compatible with related chain, drive, and accessory products. They have a short turning radius and therefore high flexibility and strength.
The X-348 Forged Rivetless Chain is an example of such a drive chain. This chain is perfect for automated machines that run late at night. It is available in a variety of weight limits and sizes. The chain is pre-stressed after assembly, and a two-year parts replacement warranty is standard. Its durability is also enhanced by the inclusion of push dogs that engage the front floating dogs on the leading free cart.
In addition to this type of chain, CZPT also offers a full line of Caterpillar Drive chains. They are designed to provide fatigue-free operation. The drive jaws are one-piece forged induction hardened steel compatible with forged rivetless chains. There are many special custom chains to choose from. These forged chains can be installed on Caterpillars as well as other types of tractors for maximum durability and efficiency.
Distributors of forged chain products offer a variety of sizes, pitches, and materials for material handling and conveying systems. Typically, this type of chain is used in conveyor and lifting applications and ranges from 3 inches to 9 inches. Depending on size and thickness, it is ideal for a variety of industries including automotive, food, paper, and steel mills. In addition, the chain is corrosion-resistant and corrosion-free.
chain

flat top chain

The flat-top drive chain is used for conveying large and medium workpiece pallets. These chains are available in a variety of materials and designs, including plastic, steel, and stainless steel. The steel flat top chain provides high wear resistance and excellent noise reduction. Steel flat-top chains are suitable for applications requiring high loads and excellent workmanship. HD profiles are compatible with steel flat-top chains and are highly recommended for extreme applications.
CZPT produces two types of flat-top chains. Tabletop chains are similar to wing door hinges, while MatTop chains are assembled using full-width pins. Both types are available in standard widths of 3.25 to 12 inches and are shipped in 10-foot sections. Both types can be shaped according to the width of the chain.
Double hinge pin flat-top chains are available with a variety of hinge pins. There are TAB and standard hinge pins for different machines and drive methods. A flat-top chain with dual-hinge pins will provide higher load carrying capacity, but be aware of the hinge pin size and style required for your application. The hinge pins should be long enough to ensure a smooth and smooth delivery. Double hinge pin flat top drive chains are available in a variety of sizes and designs.
Using standardized components and modules, the flat-top chain conveyor system is highly adaptable and can be seamlessly integrated into any production process. It can also be extended to handle a wider range of containers. Using a single drive, the CZPT system can be extended to a length of 40 meters. Its versatility makes it the choice of many industries. There is also a wide variety of flat-top drive chains to choose from.

time chain

The drive chain is a critical component of any internal combustion engine. They transmit the rotation of the crankshaft to the camshaft via the timing chain. These chains have been standard in cars since the turn of the 20th century, and while toothed belts have become a more cost-effective alternative, manufacturers such as Mercedes-Benz and BMW remain loyal to traditional chain drives.
Timing chains come in many shapes and sizes, with different designs depending on the type of load they must carry. Roller chains are the most common and offer an excellent balance of strength and NVH performance. Its design is similar to a bicycle chain, and the inner link consists of two blades pressed into the holes of the sprocket. Roller chains can also pass through smaller diameter sprockets, and roller chains take up less space than chain links.
The length of the chain allows it to stretch over time. In addition, improper oil maintenance can lead to premature timing chain damage. Without an oil change, the chain is not lubricated, causing the rollers and links to rub against each other. This can cause excessive chain wear and eventually chain breakage. To avoid premature timing chain failure, it is advisable to have your vehicle inspected by a mechanic.
For automotive timing chains, the CZPT website offers the best prices for the timing chain you need. You can find the right timing chain for your car by registering on this website. You can also contact a mechanic to get the parts you need. If you don’t know how to diagnose your timing mechanism, you can always check the owner’s manual or the manufacturer’s website. It is critical to follow the manufacturer’s recommendations to avoid catastrophic failure.
chain

Oil-impregnated bushing

Oil-impregnated bushings for drive chains are an excellent solution to drive chain lubrication problems. Usually, drive chains require additional lubrication, but by adding special oil-impregnated bushings, the chain can run without lubrication. Oil-immersed bushings, such as those of the CZPT brand for CZPT, are specially manufactured for this purpose. They capture oil during operation and release it onto the bearing surfaces, returning it to the bushing by capillary action.
Since their introduction to the automotive industry, engineered composite plastic bushings have been shown to provide longer service life and save up to 40% in maintenance costs. They have replaced bronze in thousands of applications, including pumps, medical equipment, and food processing machinery. Because oil-impregnated bronze bearings rely on capillary action, they must rotate to maintain a complete lubricating film. However, several factors prevent this film from fully forming, including low speeds and intermittent use.
During the manufacturing process, oil-impregnated bushings are manufactured to meet the wear resistance requirements of the drive chain. The sintered density of the oil-impregnated sintered bushing determines its mechanical strength. The larger sintered density increases the wear resistance of the oil-impregnated bushing but reduces the mechanical strength.
Whether or not a drive chain is lubricated will determine its overall life. Proper lubrication can extend chain life by 100% compared to a chain without proper lubrication. Proper lubrication means using high-quality oils without additives and oils that flow freely at prevailing temperatures. Indirect heating is required by immersing the drive chain in the molten pool as certain additives prevent oil from entering the chain joint.

China Kgg Cable Carrier Metal Energy Hose Wires Drag Tracks Cable Chain Xc30 Series     bush chain excavatorChina Kgg Cable Carrier Metal Energy Hose Wires Drag Tracks Cable Chain Xc30 Series     bush chain excavator
editor by czh 2023-01-21

Side Bow Roller Chain

As one of the side bow roller chain with sawtooth plates manufacturers, suppliers, and exporters of mechanical products, We offer side bow roller chain and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of side bow roller chain.

Recent Posts